Procedure - Water Fed Pole System Setup

1. Locate outlet and spigot in a centralized location to achieve the whole job if possible.
2. Inspect equipment for damage
3. Attach hose to spigot and pump inlet port
4. Attach pump to hose reel
5. Attack hose reel to filter system inlet port
6. Turn on water at spigot
7. Make sure the “flush” knob is in the “flush” postion.
8. Roll out rhino line to start location
9. Attach rhino line to pole and brush head
10. Plug shock shield into outlet
11. Run extension cord from pump to outlet and plug in
12. Turn flush knob to “filter” position
13. Let the filter system run for 1 to 3 min before proceeding with cleaning